Skip to Content
Version 21.1 by Kieran Kelleher on 2010/01/27 13:23
Show last authors
1 **Discussion:** You select 'Run as...' > WOApplication; the project runs; you can copy the url out of the console and into the browser; but it doesn't conveniently launch straight into the browser anymore.
2
3 **Solution:** You probably have a space in your Eclipse project name; eg. 'My Project' remove it, or replace it suitably, eg. 'My//Project' and it will probably all start working again. :p//
4
5 **Discussion:** Presumably, the launch fails because the Eclipse project name automatically forms part of the URL for running the application as a WOApplication in Eclipse/WOLips. However, a space is not a legal character for a URL as we know, and must usually be escaped with UTF-8 encoding as '%20'.
6
7 === Leopard is missing WOOpenURL ===
8
9 {{note}}
10
11 WOOpenURL only exists in WO 5.3.3 and lower versions of WO. WO 5.4.X does not use WOOpenURL file, which incidentally existed to provide cross-platform launching. In WO 5.4.X, the method com.webobjects._ideservices._WOLaunchServices#_openURL now determines the logic for auto-open-in-browser. And if you could look at the source code, not that I would of course, you would notice that it just calls /usr/bin/open instead. So if you want auto-open-in-browser to launch a different browser than your default (for example if you use FireFox for development and Safari as your default browser) you will have to write a patch for this class and insert it in classpath ahead of the built-in one.
12
13 {{/note}}
14
15 If you are on Leopard, something else is going on.
16
17 There used to be an application called /System/Library/WebObjects/Executables/WOOpenURL that opened the standard web browser with a pointer to the running the project, eg: http:~/~/193.78.79.17:49832/cgi-bin/WebObjects/d2wupload2.woa
18
19 That application does not exist any more in Leopard. But there is a simple workaround:
20
21 Type this in a terminal as root (or precede with sudo).
22
23 {{code}}
24
25 mkdir -p /System/Library/WebObjects/Executables
26 ln -s /usr/bin/open /System/Library/WebObjects/Executables/WOOpenURL
27
28 {{/code}}
29
30 ==== WebObjects 5.3.3 on Leopard ====
31
32 If you change the **wo.wosystemroot** setting to use WO 5.3 frameworks from a different location than ##/System/Library/Frameworks##, you will need to also change the location of the above hack. e.g.
33
34 {{code}}
35
36 wo.wosystemroot=/Users/chuck
37
38 {{/code}}
39
40 Requires this change:
41
42 {{code}}
43
44 mkdir -p /Users/chuck/Library/WebObjects/Executables
45 ln -s /usr/bin/open /Users/chuck/Library/WebObjects/Executables/WOOpenURL
46
47 {{/code}}