Skip to Content

Wiki source code of Debugging WOLips

Version 54.1 by mark_ritchie on 2010/02/17 13:52
Show last authors
1 = Debugging WOLips as the master does! =
2
3 These instructions is intended for the developer who wants to compile and run WOLips source for the purpose of debugging or other exploration. Thanks very much to Mike Schrag for the guidance to get this setup and working!
4
5 == Overview of what's going on ==
6
7 We're going to check out the latest source for WOLips, build it and arrange for Eclipse to launch is a debug mode to test it out. It's very handy that Eclipse has a built in ability to launch itself in debug mode and load the local versions of the plugins. If you read the old and out dated instructions floating about that talk about building an entire release and installing them into a new copy of Eclipse then you're going to like this method a whole lot better! ;-)
8
9 == The setup ==
10
11 When I did this and wrote these notes, I was using:
12
13 * Mac OS X 10.5.7
14 * Java 1.5.0//19//
15 * Eclipse 3.4.2 (eclipse-SDK-3.4.2-macosx-carbon.tar.gz)
16
17 {{panel title="Snow Leopard Update" bgColor="#FFFFCE"}}
18
19 I gave this a go on Snow Leopard and it worked fine with one little detail which I've noted at the end of this page.
20 Here's the setup I was using:
21 - Mac OS X 10.6.1
22 - Java 1.6.0_15
23 - Eclipse 3.4.2 (eclipse-SDK-3.4.2-macosx-carbon.tar.gz)
24
25 {{/panel}}
26
27 == Checking out the source code ==
28
29 **A note for the impatient - don't try to checkout the source right into Eclipse. The files aren't structured in a way that allows this to work. I know because I tried to do it that way first!** ;-)
30
31 === Check out the source code into a local folder ===
32
33 You're checking out a local copy of the code from the source repository. Next, we're going to selectively import (but **not** copy) parts of that code into Eclipse. I'm using command line subversion to check out the lastest version however feel free to use a different tool or different version, as you like.
34
35 svn co https:~/~/svn.objectstyle.org/repos/woproject/trunk/woproject ,,/woproject,,
36
37 Note that I've checked out the source code into my home folder. It doesn't matter where you put the source code as long as you can find it in the steps below.
38
39 === Create a new eclipse workspace ===
40
41 Launch a clean copy of Eclipse with no plugings installed. Strictly speaking, probably not necessary however these are the steps which I took.
42
43 Create a new Workspace
44 I chose ,,/WOLipsDebugging
45 [[image:Workspace.png]],,
46
47 === Import woenvironment ===
48
49 Start off by importing the woenvironment project. From the File menu, select Import
50 [[image:ImportMenu.png]]
51 Click the disclosure triangle for General and select Existing Projects into Workspace
52 [[image:ExistingProject.png]]
53 Click Next button.
54 Ensure that "Select root directory" is selected and click Browse
55 Browse to the folder where you checked out the woproject source code above and select woenvironment.
56 [[image:woenvironmentCheckout.png]]
57 Eclipse should scan the folder and notice one project in the folder called woenvironment.
58 **It's important that you don't have 'Copy the project into your workspace' selected.**
59 [[image:woenvironmentProject.png]]
60 Click Finish.
61
62 Once Eclipse has finished building the project, there should be no errors! If that's not the case, then you need to back up and make sure that you've followed all the steps above.
63
64 === Import wolips projects into your workspace ===
65
66 Repeat the steps above and import all the wolips projects except for 3!
67 **EntityModler, eomodeldoc and org.objectstyle.wolips.eomodeler.factories
68 are special projects which require special setup and caffination before touching.**
69
70 The import of wolips should look like this:
71 [[image:wolipsImport.png]]
72
73 And Eclipse should identify a whole bunch of projects.
74 **Make sure that you deselect the 3 special cases noted above**
75 The list of projects should look something like this:
76 [[image:wolipsProjects.png]]
77
78 Click Finish and the projects should all be imported.
79
80 {{note}}
81
82 When I did this I got the following error message.
83 I have no idea what this means...
84 !ResourceErrorMessage.png!
85
86 {{/note}}
87
88 Once Eclipse finishes building the projects there are going to be a whole bunch of build errors. Don't Panic. Most of them will resolve themselves after the next steps.
89
90 === Import wolips plugins ===
91
92 In the same way as above, import the core plugins from wolips/core/plugins. Something like this:
93 [[image:corePluginImport.png]]
94 [[image:corePluginProjects.png]]
95
96 === Import 3rd party plugins ===
97
98 Finally, import the third party plugins from wolips/3rdparty/plugin. Something like this:
99 [[image:thridPartyImport.png]]
100 [[image:thirdPartyProjects.png]]
101
102 === Close special projects ===
103
104 In case you missed the notices above, close these projects.
105
106 * EntityModeler
107 * eomodeldoc
108 * org.objectstyle.wolips.eomodeler.factories
109 (Note: Working on these projects is beyond the scope of what I needed to do. Sorry.)
110
111 === Close projects which require additional resources to compile ===
112
113 These projects require additional resources to compile. As I didn't need them, I just closed them.
114
115 * org.objectstyle.wolips.apple.mavenintegration
116 * org.objectstyle.wolips.groovy.ui
117 * org.objectstyle.wolips.jprofiler.launching
118
119 == The run configuration setup ==
120
121 At this point, you should have a long list of packages which should all be compiling.
122 If that's not the case, please document additional steps here, making special note of your setup.
123
124 Getting on with the configuration to be able to test the software which is now compiling.
125 From the Run menu, select "Debug Configurations ..."
126 [[image:debugConfiguration.png]]
127
128 Select "Eclipse Application" from the list on the left
129 and then click the "New" button at the top.
130 [[image:newLaunchConfiguration.png]]
131 This creates a new launch configuration which you can customize as you like.
132 By default it's called 'New//configuration'. For this session, I named it DebugEclipse//
133
134 My preference is to explicitly set the workspace for testing however I'm sure the default will be fine if you like it.
135 I chose: $workspace//loc}/../WOLipsDebuggingWorkspace
136 My setup looked something like below however there are lots of configuration options which I didn't need to explore:
137 [[image:debugConfigured.png]]//
138
139 == Launch the debug version ==
140
141 Click the Debug button in the debug configuration window to launch the test version.
142 This will be a clean version of Eclipse with the workspace which you set and any other settings.
143 By default, all of the plugins are loaded and ready for testing!
144 And now, you should be running inside the debug version of Eclipse with all the wolips bits to play with!
145
146 == Snow Leopard Update ==
147
148 I was running the carbon version of Eclipse 3.4.2 on Snow Leopard.
149 Up to this point, I was following the instructions above however when I tried to launch Eclipse, I got this error:
150
151 {{code value="java"}}
152
153 java.lang.UnsatisfiedLinkError: Cannot load 32-bit SWT libraries on 64-bit JVM
154 at org.eclipse.swt.internal.Library.loadLibrary(Library.java:177)
155 at org.eclipse.swt.internal.Library.loadLibrary(Library.java:151)
156 ...
157
158 {{/code}}
159
160 This is a known problem and is documented <a href="http:~/~/www.eclipse.org/swt/faq.php#cocoa32launch">here</a>
161 The fix is to add the --d32 parameter to the launch arguments.--
162
163 Original: --os $target.os} --ws $target.ws} --arch $target.arch} --nl $target.nl}
164 Updated: --os $target.os} --ws $target.ws} --arch $target.arch} --nl $target.nl} --d32--
165
166 My final setup looked like this:
167 [[image:32Bit_jvm_arguments.png]]