Skip to Content
Last modified by Bastian Triller on 2013/10/05 10:40
From version 164.1
edited by Kieran Kelleher
on 2010/09/17 12:56
Change comment: There is no comment for this version
To version 174.1
edited by Kieran Kelleher
on 2011/03/25 18:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Download Wonder Source, Build and Install
1 +Download Wonder Source, Build, Install and Upgrade
Content
... ... @@ -11,32 +11,16 @@
11 11  
12 12  == Source Frameworks Initial Installation ==
13 13  
14 -Open a terminal and navigate to a directory where you want to maintain a source "working copy" and just use the following easy-peasy commands to download the Wonder source. Note that the build and installation commands are slighly different for WebObjects 5.4.X. So procedures for both WebObjects 5.4.X and 5.3.X are shown below. Pick you poison:
14 +As of March 25th, 2011, Wonder is maintained on github. So git is what we use to get a local clone of the repository allowing us to directly use Wonder source.
15 15  
16 -{{code title="Procedure for WebObjects 5.4.X"}}
16 +Open a terminal and navigate to a directory where you want to maintain a source "working copy" and just use the following easy-peasy commands to clone Wonder source to your own hard-drive.
17 17  
18 -# Checkout the source from subversion repository into a new directory named "WonderSource"
19 -# Note instead of HEAD, you can use a specific svn version number if you want
20 -svn co http://wonder.svn.sourceforge.net/svnroot/wonder/trunk/Wonder --revision HEAD WonderSource
18 +{{code title="Cloning Project Wonder for the First Time"}}
21 21  
22 -# Navigate into the working copy root
23 -cd WonderSource
20 +# Clone the source repository from github into a new directory named "WonderSource".
21 +# Note the URL shown here is the public read-only URL. Committers should use the SSH form of the URL for read-write
22 +git clone git://github.com/projectwonder/wonder.git WonderSource
24 24  
25 -# Build the frameworks from the source (BTW, they get built into a directory named Roots in your home dir)
26 -ant -Dwonder.patch=54 frameworks
27 -
28 -# Install the frameworks (this just copies the built frameworks from ~/Roots to
29 -# the runtime Frameworks directory, usually at /Library/Frameworks)
30 -sudo ant -Dwonder.patch=54 frameworks.install
31 -
32 -{{/code}}
33 -
34 -{{code title="Procedure for WebObjects 5.3.X"}}
35 -
36 -# Checkout the source from subversion repository into a new directory named "WonderSource"
37 -# Note instead of HEAD, you can use a specific svn version number if you want
38 -svn co http://wonder.svn.sourceforge.net/svnroot/wonder/trunk/Wonder --revision HEAD WonderSource
39 -
40 40  # Navigate into the working copy root
41 41  cd WonderSource
42 42  
... ... @@ -51,9 +51,9 @@
51 51  
52 52  == Source Frameworks Upgrade Installation ==
53 53  
54 -Assuming you already installed Wonder from source using the method outlined above, you can use the following procedure to upgrade to a newer, or just different version. Note that the procedure for both WebObjects 5.4.X and 5.3.X are outlined below. They are the same except for the last 3 ant commands.
38 +Assuming you already cloned and installed Wonder from source using the method outlined above, you can use the following procedure pull the latest changes into your local repository.
55 55  
56 -{{code title="Procedure for WebObjects 5.4.X"}}
40 +{{code title="Procedure for WebObjects 5.3.X or 5.4.X"}}
57 57  
58 58  # Navigate to the Roots directory that was automatically created by the initial Source installation procedure above
59 59  cd ~/Roots/
... ... @@ -64,44 +64,38 @@
64 64  # Navigate to the original Wonder source directory that you created above during initial source installation
65 65  cd /path/to/WonderSource
66 66  
67 -# Update the source to the HEAD revision (aka latest). You can also use a specific svn
68 -# repository version instead of the term 'HEAD', for example 11272
69 -svn update --force --accept theirs-full --revision HEAD
51 +# Pull the changes you do not have and merge them with your local repository
52 +git pull
70 70  
71 -# Clean the previous build artifacts
72 -ant -Dwonder.patch=54 clean
54 +# Clean, build and install the frameworks
55 +ant clean; ant frameworks; sudo ant frameworks.install
73 73  
74 -# Build from the latest source
75 -ant -Dwonder.patch=54 frameworks
76 -
77 -# Install the latest built frameworks
78 -sudo ant -Dwonder.patch=54 frameworks.install
79 -
80 80  {{/code}}
81 81  
82 -{{code title="Procedure for WebObjects 5.3.X"}}
59 +{{info}}
83 83  
84 -# Navigate to the Roots directory that was automatically created by the initial Source installation procedure above
85 -cd ~/Roots/
61 +If you have any trouble or errors due to your local repository getting hosed, then simply delete the entire local repository directory, the \~/Roots directory and just start over using the initial source clone and installation procedure outlined above.
86 86  
87 -# Delete all installed frameworks whose names match the built frameworks in this Roots build folder
88 -for FRAMEWORK in `echo *.framework`; do sudo rm -r /Library/Frameworks/${FRAMEWORK}; done
63 +{{/info}}
89 89  
90 -# Navigate to the original Wonder source directory that you created above during initial source installation
91 -cd /path/to/WonderSource
65 +{{info value="Custom Development Enviroment File layout using Custom wolips.properties"}}
92 92  
93 -# Update the source to the HEAD revision (aka latest). You can also use a specific svn
94 -# repository version instead of the term 'HEAD', for example 11272
95 -svn update --force --accept theirs-full --revision HEAD
67 +If you have a custom wolips properties file for a specific workspace and you want to have a specific Wonder clone for that workspace, you can simply link your custom wolips properties file to a soft link named build.properties in the working copy root directory. The Wonder build script will supersede all other filesystem layout poperties with the properties in that file.
96 96  
97 -# Clean, build and install the frameworks
98 -ant clean; ant frameworks; sudo ant frameworks.install
69 +For example:
99 99  
71 +{code}
72 +$ cd my/special/purpose/clone/of/Wonder
73 +$ ln -s ~/Library/Application\ Support/WOLips/wolips.custom.properties build.properties
74 +{code}
100 100  
101 -{{/code}}
76 +An example of where this approach might be used would be when you have different projects (perhaps in a specially designated workspace) that use a specific version of WebObjects and a specific version or branch of Wonder.
102 102  
103 -{{info}}
78 +*Tip:* Specify a custom build directory for Wonder by adding the property 'wo.external.root' to the custom wolips properties file, for example
79 +{code}
80 +wo.external.root=/Users/mike/Developer/special/directory/Roots
81 +{code}
104 104  
105 -If you have any trouble or errors due to your working copy getting hosed, then simply delete the entire working copy directory, the \~/Roots directory and just start over using the initial source installation procedure outlined above.
83 +*Tip:* A custom WebServer install directory can be specified to Wonder by adding the property 'wo.server.root' to the custom wolips properties file also.
106 106  
107 107  {{/info}}