Work in progress!
|Table of Contents|
Usually, people deploy Project Wonder applications in one of those two ways: using the "classic" deployment tools (wotaskd + Web server module) or using a servlet container (aka Tomcat/Jboss/etc.).
We will focus on the classic tools since this is the method that the majority of the community use. The classic deployment tools consists of:
- wotaskd. A daemon that act as a watchdog to send lifeboat to the applications its manage + launching and stopping applications. Source code is available and it's actually a Project Wonder application!
- Module for your Web server software (Apache or IIS). If a module don't exist for your preferred Web server, you can use a CGI.
But first, we need to actually make our projects ready for deployment.
Building the "products"
When you run your projects inside Eclipse, it uses the incremental builder and the "internal builds" are not ready for deployment (e.g. don't use the build from the "build" folder of the project, it's not a complete build!). You need to use Ant or Maven to actually build a full "product". Let's focus on Ant because, again, this is what the majority use. You can also use Jenkins, but Jenkins will need to call Maven or Ant to build the projects anyway.
One important thing to remember is that you need to build and install the frameworks before your build your applications. Building your applications will NOT add the frameworks to the product if you didn't build the frameworks first. So let's build and install the BlogCommon framework first.
In Eclipse, right-click on the BlogCommon project, and select WOLips Ant Tools -> Install.
By calling this, Eclipse will call Ant to build the framework and install it in (on OS X) /Library/Frameworks, so the framework should be at /Library/Frameworks/BlogCommon.framework.
You are now ready to build the applications. The procedure is the same as for frameworks, so right-click on the BlogRest project, and select WOLips Ant Tools -> Install. The application will install itself in (on OS X) /Library/WebObjects/Applications/. But there's a difference with a build for a framework: building an application will build three products:
- a .woa (in our case: BlogRest.woa) that is a regular application bundle.
- a tar+gzip archive of the application (in our case: BlogRest-Application.tar.gz)
- a tar+gzip archive of the Web server resources (the files that are in the WebResources folders of your projects). That file is name <ApplicationName>-WebServerResources.tar.gz (so in our case, BlogRest-WebServerResources.tar.gz).
The tar archive exists to make it faster to copy the application to your deployment server because it's two files instead of hundred and they are compressed.
Installing the deployment tools
We are now ready to install the deployment tools. The wiki have installation instructions for many platforms, so jump over to the instructions for your deployment platform. Running the deployment tools (at least wotaskd and the Apache module) is also useful on your development machine.
Configuring the applications with JavaMonitor
Before adding the application into JavaMonitor, you have to copy the applications on the deployment server. You can use any tools that you usually use to copy files on the remote server (scp, rsync, CyberDuck, etc.). Usually you need to copy the application to the following remote directory:
- /Library/WebObjects/Applications (on OS X)
- /opt/Local/Library/WebObjects/Applications (on other UNIX systems than OS X, like Linux, BSD or Solaris)
Copy the BlogRest-Application.tar.gz archive into the correct directory from the above list and uncompressed it (tar zxf BlogRest-Application.tar.gz). This will create a new directory named BlogRest.woa.
One last step to do for the application. Usually, the application will run with the appserver user and the appserveradm group. You need to make sure that either the group or the user can run the application. The best way to do this is to change the group of the files to be appserveradm. Your user on the deployment server should also be part of that group. To change the group:
chgrp -R appserveradm BlogRest.woa
You also need to install the Web server resources to a different location. Why is that? Because it's better to serve static resources like images and CSS from the Web server software (Apache, IIS, etc.) than from the Web application to get better performance and caching.
Usually, the Web server resources goes to:
- /Library/WebServer/Documents/WebObjects (on OS X)
- /opt/Local/Library/WebServer/Documents/WebObjects (on other UNIX systems than OS X, like Linux, BSD or Solaris)
Copy the BlogRest-WebServerResources.tar.gz archive into the correct directory from the above list and uncompressed it (tar zxf BlogRest-WebServerResources.tar.gz). Doing this command will result in a new directory called BlogRest.woa.
Everything on the file system is ok, the next step is to add the application to JavaMonitor. If the development tools have been installed correctly, JavaMonitor will run on port 56789 on your deployment server. For example, if the DNS name of your deployment server is my.host.com, the URL will be http://my.host.com:56789
After the Add Application Named label, enter BlogRest into the text field and click Add Application.
You will get to a page where you need to specific the path to the launch script inside the application bundle. If the development server is on OS X, the path will be:
Put that path in the text field next to the MacOSX label.
On other UNIXs, the path is:
Put that path in the text field next to the Unix label.
It would also be useful to log problems to a log file. For now, we will put the log into /tmp. That means that the log will be lost when you reboot the server or if you have tools that clean the /tmp directory every day, but for now it would do the job.
To specify the path to the log file, go to the Output Path section and enter /tmp in the text field next to MacOSX (if your deployment box is on OS X) or next to Unix (if your development is UNIX but not OS X).
The next step is to click on the Push All button, which saves the application configuration. Now, we can add instances of the application. To do so, click on the Detail View link.
You will see a section saying _Add: 1 instance(s) on host: _. Click the Add button. That will add one instance of the application. It's possible to run multiple instances of an application, mainly to load balance requests and also to have other working instances in case an instance is going AWOL. But for now, running one instance is enough.
If the application launches successfully, a link on the application name will appear after 30 seconds in JavaMonitor. If a link does not appear after a minute and the status is still STOP, something is wrong. Check the log that was created in /tmp (the log should be /tmp/WOCommunity-1) to check for any errors.
If the log file does not exist, 99% of the time, the problem is file permissions. Make sure that the launch script for the application (BlogRest.woa/BlogRest) is accessible for the appserver user. If the file permissions are ok, you can launch the script manually with the appserver user by doing:
On OS X:
sudo su - appserver cd /Library/WebServer/Documents/WebObjects/BlogRest.woa/ ./BlogRest
On other UNIXs:
sudo su - appserver cd /opt/Local/Library/WebServer/Documents/WebObjects/BlogRest.woa/ ./BlogRest
If the application can start from the command line, it should start by the development tools too. If you see errors when launching the application by command line, fix them and try to launch it by command line again.