Child pages
  • Deploying on FreeBSD 8.2 and WebObjects 5.4.3

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

This page describes the steps to install WebObjects 5.4.3 from scratch on a modern FreeBSD 8.2 system. This instructions do not include using the WOPort, as described in Deploying on FreeBSD 6.x and 7.x (WO 5.3.3). Although the WOPort would save a lot of time, it's not being actively maintained, and AFAIK does not support WO 5.4.3. This instructions are based on WOInstaller.jar, and provide all the necessary steps to a working deployment environment, including Apache web server integration.

The following steps assume you have installed the necessary ports. Those include java/diablo-jdk16, www/apache22 and devel/git.

1. Download WOInstaller.jar from http://wocommunity.org/documents/tools

2. As root, create the /usr/local/apple directory:

Code Block
mkdir /usr/local/apple

3. Run the following command to install the WebObjects frameworks in the directory just created:

Code Block
java -jar WOInstaller.jar 5.4.3 /usr/local/apple

4. Edit /etc/rc.conf and add the following lines:

Code Block
## WebObjects ##
JavaMonitor_enable="YES"
wotaskd_enable="YES"

5. Run the following commands to create needed directories and set correct permissions:

Code Block
mkdir /var/run/webobjects/
mkdir /var/log/webobjects/
chmod ugo+x /usr/local/apple/Library/WebObjects/JavaApplications/wotaskd.woa/wotaskd
chmod ugo+x /usr/local/apple/Library/WebObjects/JavaApplications/JavaMonitor.woa/JavaMonitor
chgrp www /usr/local/apple/Local/Library/WebObjects/Configuration/
chmod g+w /usr/local/apple/Local/Library/WebObjects/Configuration/

6. Place these two files in /usr/local/etc/rc.d/ directory: wotaskd and JavaMonitor

7. Run the following commands to start wotaskd and JavaMonitor. After running this commands, your system should be running wotaskd and JavaMonitor. You can verify that by running top or ps. Also, you should take the time now to configure JavaMonitor, including setting the administration password.

Code Block
/usr/local/etc/rc.d/wotaskd start
/usr/local/etc/rc.d/JavaMonitor start

8. We need to checkout Project Wonder to obtain a copy of the Apache adaptor source. To do that, cd to a work directory, and run the following command. This will checkout Project Wonder from GitHub.

Code Block
git clone https://github.com/wocommunity/wonder.git

9. Inside the Project Wonder directory, navigate to the Utilities/Adaptors directory:

Code Block
cd Utilities/Adaptors

10. Edit the make.config file, and set the OS to FreeBSD by changing the following line:

Code Block
# Set the platform you are building on
ADAPTOR_OS = FreeBSD

11. Run the gmake command on that directory. Note that you have to run gmake and not make. Also, do not change directory to Apache2.2. The command should be run on the Utilities/Adaptors directory.

Code Block
gmake

12. After successful compilation, enter Utilities/Adaptors/Apache2.2 directory and install the module on Apache:

Code Block
cd Apache2.2
apxs -i -a -n WebObjects mod_WebObjects.la

13. Edit the /usr/local/etc/apache22/httpd.conf file and make sure the LoadModule line for the WebObjects module appears before LoadModule for mod_rewrite. If not, swap the order of both lines.

14. Still in /usr/local/etc/apache22/httpd.conf file, tweak the following configurations (you can do however you want, this are just suggestions to make it run plain and simply):

  • Change None to All in the Allow line of the following configuration section:
Code Block
<Directory />
    AllowOverride None
    Order deny,allow
    Allow from all
</Directory>
  • Comment out the following line and section, if you want to use the default /cgi-bin/WebObects URL for the WebObjects module:
Code Block
#   ScriptAlias /cgi-bin/ "/usr/local/www/apache22/cgi-bin/"
Code Block
#<Directory "/usr/local/www/apache22/cgi-bin">
#    AllowOverride None
#    Options None
#    Order allow,deny
#    Allow from all
#</Directory>

15. Assuming you're still in Wonder's Utilities/Adaptors/Apache2.2 directory (cd to it if you left it in the previous step), copy the following file to the Apache configuration directory:

Code Block
cp apache.conf /usr/local/etc/apache22/Includes/wo.conf

16. Edit the destination file (/usr/local/etc/apache22/Includes/wo.conf). You need to make two changes:

  • Comment out the LoadModule line, as the module is already loaded by httpd.conf.
  • Set WebObjectsDocumentRoot to /usr/local/www/apache22/data:
Code Block
WebObjectsDocumentRoot /usr/local/www/apache22/data

17. Edit /etc/rc.conf again and add the following lines:

Code Block
apache22_enable="YES"

18. Run the following command to launch Apache:

Code Block
/usr/local/etc/rc.d/apache22 start

You should now have a working web server and WebObjects deployment environment. Try to open your browser and access http://<your-server-name>/cgi-bin/WebObjects/app.woa and you should see the error "The requested application was not found on this server." generated by the WebObjects adaptor.

Project Wonder

To install Project Wonder, assuming you performed all the previous steps and checked out Wonder from GitHub, do the following steps logged in as your username (not root!):

1. Install the port devel/apache-ant if not yet installed.

2. Run the following command:

Code Block
mkdir -p "~/Library/Application Support/WOLips/"

3. On that directory, create a file named wolips.properties with the following content, adjusted to your paths:

Code Block
#Wed Sep 17 01:33:31 WEST 2008
wo.system.root=/usr/local/apple
wo.user.frameworks=/home/<username>/Library/Frameworks
wo.system.frameworks=/usr/local/apple/Library/Frameworks
wo.bootstrapjar=/usr/local/apple/Library/WebObjects/JavaApplications/wotaskd.woa/WOBootstrap.jar
wo.network.frameworks=
wo.api.root=
wo.network.root=
wo.extensions=/usr/local/apple/Local/Library/WebObjects/Extensions
wo.user.root=/home/<username>
wo.local.frameworks=/usr/local/apple/Local/Library/Frameworks
wo.apps.root=/usr/local/apple/Local/Library/WebObjects/Applications
wo.local.root=/usr/local/apple/Local
wo.systemroot=/usr/local/apple
wo.wosystemroot=/usr/local/apple
wo.wolocalroot=/usr/local/apple/Local
wo.localroot=/usr/local/apple/Local
wo.server.root=/usr/local/www/apache22/data/WebObjects

4. Create /usr/local/www/apache22/data/WebObjects directory with write permission for group wheel (or whatever group you are on).

5. Run the following command:

Code Block
chmod -R g+w /usr/local/apple/Local/Library

Note that you can use more restrict permissions than the ones showed here. This should be only considered as an example.

6. cd into the Wonder directory.

7. Run the commands:

Code Block
ant frameworks
ant frameworks.install

This will compile and install Wonder in your system, including the web server resources of Wonder frameworks, like Ajax.