This page describes the steps to install WebObjects 5.4.3 from scratch on a modern FreeBSD 8.2 system. This instructions do not include using the WOPort, as described in Deploying on FreeBSD 6.x and 7.x (WO 5.3.3). Although the WOPort would save a lot of time, it's not being actively maintained, and AFAIK does not support WO 5.4.3. This instructions are based on WOInstaller.jar, and provide all the necessary steps to a working deployment environment, including Apache web server integration.
The following steps assume you have installed the necessary ports. Those include java/diablo-jdk16, www/apache22 and devel/git.
WOInstaller.jar from http://wocommunity.org/documents/tools
2. As root, create the /usr/local/apple directory:
3. Run the following command to install the WebObjects frameworks in the directory just created:
/etc/rc.conf and add the following lines:
5. Run the following commands to create needed directories and set correct permissions:
7. Run the following commands to start
JavaMonitor. After running this commands, your system should be running wotaskd and JavaMonitor. You can verify that by running
ps. Also, you should take the time now to configure JavaMonitor, including setting the administration password.
8. We need to checkout Project Wonder to obtain a copy of the Apache adaptor source. To do that, cd to a work directory, and run the following command. This will checkout Project Wonder from GitHub.
9. Inside the Project Wonder directory, navigate to the
10. Edit the
make.config file, and set the OS to FreeBSD by changing the following line:
11. Run the
gmake command on that directory. Note that you have to run
gmake and not
make. Also, do not change directory to
Apache2.2. The command should be run on the
12. After successful compilation, enter
Utilities/Adaptors/Apache2.2 directory and install the module on Apache:
13. Edit the
/usr/local/etc/apache22/httpd.conf file and make sure the
LoadModule line for the WebObjects module appears before
mod_rewrite. If not, swap the order of both lines.
14. Still in
/usr/local/etc/apache22/httpd.conf file, tweak the following configurations (you can do however you want, this are just suggestions to make it run plain and simply):
Allowline of the following configuration section:
- Comment out the following line and section, if you want to use the default
/cgi-bin/WebObectsURL for the WebObjects module:
15. Assuming you're still in Wonder's
Utilities/Adaptors/Apache2.2 directory (cd to it if you left it in the previous step), copy the following file to the Apache configuration directory:
16. Edit the destination file (
/usr/local/etc/apache22/Includes/wo.conf). You need to make two changes:
- Comment out the LoadModule line, as the module is already loaded by
/etc/rc.conf again and add the following lines:
18. Run the following command to launch Apache:
You should now have a working web server and WebObjects deployment environment. Try to open your browser and access
http://<your-server-name>/cgi-bin/WebObjects/app.woa and you should see the error "The requested application was not found on this server." generated by the WebObjects adaptor.
To install Project Wonder, assuming you performed all the previous steps and checked out Wonder from GitHub, do the following steps logged in as your username (not root!):
1. Install the port
devel/apache-ant if not yet installed.
2. Run the following command:
3. On that directory, create a file named
wolips.properties with the following content, adjusted to your paths:
/usr/local/www/apache22/data/WebObjects directory with write permission for group
wheel (or whatever group you are on).
5. Run the following command:
Note that you can use more restrict permissions than the ones showed here. This should be only considered as an example.
cd into the Wonder directory.
7. Run the commands:
This will compile and install Wonder in your system, including the web server resources of Wonder frameworks, like Ajax.